The High Power 3-Axis Scanner for Laser Material Processing Applications from Cambridge Technology
The 3-Axis Scanner 3D Modular Systems available from Cambridge Technology are integrated 3-Axis s……...
For applications that require a wear resistant and an electrically conductive tip we recommend this type. Some applications are Tunneling AFM and Scanning Capacitance Microscopy (SCM). The CDT Diamond Coating is slightly doped and the total resistance measured in contact to a platinium surface is < 10 kOhm.
The typical macroscopic tip radius of curvature is between 100 and 200 nm. Nanoroughness in the 10 nm regime improves the resolution on flat surfaces.
The probe offers unique features:
real diamond coating, slightly doped
high mechanical Q-factor for high sensitivity
The reflex coating is an approximately 30 nm thick aluminum coating on the detector side of the cantilever which enhances the reflectivity of the laser beam by a factor of about 2.5. Furthermore it prevents light from interfering within the cantilever. The virtually stress-free coating is bending the cantilever less than 3.5% of the cantilever length.
The 3-Axis Scanner 3D Modular Systems available from Cambridge Technology are integrated 3-Axis s……...
Vissers Sales Corp. is a Canadian distributor and representative for liquid handling equipment re……...
SCHUNK is a family owned operation and a global player in one. Totaling more than 60 years of exp……...
EternAloy Corporation (formerly Allomet) was incorporated in March of 1998. Since 1996, the Compa……...
In process environments, ensuring proper viscosity is a key success factor. You need an accurate,……...
AeroThermal (incorporating Aeroform) are pioneers in developing innovative solutions from aerospa……...
Established in 1991, the Institute of Microelectronics (IME) is a research institute under Singapore’s Agency for Science, Technology and Research (A*STAR). In IME, we focus on delivering hig……
Micropol is based in Stalybridge, Cheshire and has over 30 years experience in polymers. Out technical expertise is world class and out customers world wide. Our extensive in-house facilities allow……
RAS Process Equipment , was established in 1977 and is committed to the design, engineering and manufacturing of quality process equipment for our customers. Equipment can be manufactured to the AS……