-
3442 Miniature Axial Extensometers for Testing Small and Delicate Samples
The 3442 Miniature Axial Extensometers are small profile and ultra-light weight, they are suitable for testing small and delicate samples yet rugged enough for repeated use on standard specimens. I……
-
Epsilon MODEL 3542 Axial Extensometers
Epsilon MODEL 3542 axial extensometers are general purpose instruments suited for compression, axial tensile and cyclic testing. The model features 5% to 100% strain measuring ranges and gauge leng……
-
Epsilon MODEL 3442RA1 Miniature Averaging Axial Extensometers
The model 3442RA1 miniature averaging axial extensometers from Epsilon are strain gaged devices used for performing tensile or compressive strength tests on concrete, small rocks, and other small c……
-
3575 Transverse (Diametral) Extensometers for Diametral Strain Measurement
Epsilon’s 3575 extensometers are designed for general purpose transverse or diametral strain measurement on axially loaded specimens. This model can be used simultaneously with the Model 3542……
-
3909 Extensometers for Simple Performance Testing of Asphalt for Measuring Axial Displacements
The 3909 extensometers from Epsilon are engineered to measure axial displacements in the simple performance tests that are prescribed by NCHRP Report 465, and determine dynamic modulus of hot mix a……
-
Furnace and High Temperature Extensometer
With the Tinius Olsen high temperature furnace, customers can perform tensile tests within a temperature range of ambient to 1200 °C (2200 °F). The furnace is supported on a frame post situ……
-
Measuring Axial and Torsional Strains at Temperatures up to (1200 °C or 1600 °C) with the 7650 High Temperature Axial/ Torsional Extensometers
Epsilon’s Model 7650 extensometers simultaneously measure torsional and axial strains at high temperatures on specimens that are tested in torsional/axial machines. This model can be used wit……
-
Epsilon MODEL 3560 Bi-Axial or Axial Averaging Extensometers
The Model 3560 Extensometer from Epsilon is a single integral unit that can be configured to provide lateral (transverse) strain and averaged axial strain measurement simultaneously. Also available……
-
Laser Extensometer – Model 500LC
The Tinius Olsen model 500LC non-contacting extensometer is built to measure the extension of medium to high elongation materials, mainly elastomers. As there is no contact of this extensometer wit……
-
7642 High Temperature Un-Cooled Axial Extensometers (700 °C), Ideal for Testing Composites, Metals and High Temperatures
The Model 7642 is designed for use in environmental chambers where the entire extensometer must be exposed to high temperatures. These capacitive extensometers can be used up to 700 °C (1300 &d……
-
Dynamic Materials Corporation
Dynamic Materials Corporation is the world’s leading provider of explosion-welded clad metal plates. Its products, which are typically used in industrial capital projects, include explosion-w……
-
Municom Gmbh
In 1977, municom (Munich Communications) was founded by Andreas Gebauer in Munich. municom can look back on almost 30 years of sales experience! The company headquarters has been in Traunstein, nea……
-
Magwatt, LLC.
At Magwatt, we take great pride in the customized power equipment we produce for both superconducting and standard electromagnet designs. Although our industry has changed immensely over time, ther……
-
AMPTEK
State-of-the-art nuclear instrumentation and associated components used for X-ray and gamma ray detection. It offers SDD and Si-PIN X-ray detectors for XRF analysis. CdTe and scintillation-based ga……
-
Materion Brush Performance Alloys
As of 2011, Brush Engineered Materials Inc. became Materion Corporation, and Brush Wellman Inc. became Materion Brush Performance Alloys. We arethe world’s leading supplier of high-performanc……
-
Milacron Inc.
Milacron is a global leader in the manufacture, distribution and service of highly engineered and customized systems within the $27 billion plastic technology and processing industry. We are the on……
-
StenTech Inc.
StenTech began in the stencil industry in 1999 and is the largest North American manufacturer of Stencils, Solder Pallets, Tooling and Parts Manufacturing serving the SMT, Semiconductor, and EMS ma……
-
Fluidinova
FLUIDINOVA was founded in 2005 in Portugal as a specialized manufacturer of synthetic hydroxyapatite and tricalcium phosphate materials, which are commercialized worldwide under the brand nanoXIM&r……
-
Hot Mounting Press: Qpress 50
The Qpress 50 hot mounting press available from QATM is a modular machine used in the field of metallography for the quick, concurrent, and independent mounting of various materialographic specimen……
