Alrad Instruments Ltd.
Alrad is a provider of high quality scientific equipment to industry and research. The year 2008 ……...
The 960-TX from Columbia has been particularly developed to track vibration produced by commercial and military helicopter engines, transmissionsand airfames. The 960-TX consists of three miniature vibration sensors that are mutually perpendicular and embedded into a tough machined housing integrating a single central mounting screw
The 960-TX features combined thick film electronic signal conditioning circuitry which offers temperature compensation, low impedance output drive capabilityand high sensitivity.
The sensor configuration is suited perfectly to other vibration monitoring applications like structural analysis and aircraft modal, commercial machinery vibration monitoring, and as the key vibration sensor for all prognostic maintenance vibration diagnostic systems.
Engine, transmissionand airframe vibration measurement
Image Credit: Columbia Research Laboratories
Specifications
Source: Columbia Research Laboratories
Electrical | 960TX |
---|---|
Sensitivity | 10 mV/g Nominal |
Output Impedance | <600 Ω |
Frequency Range @+1dB | 1 to 10,000 Hz (Single Axis)2 to 2,000 Hz (Mounted A,B,C Axis) |
Bias Voltage | 8±1.5 VDC |
Transverse Sensitivity | 5% Maximum |
Amplitude Linearity | ±1% to 100 g |
Power Requirements | 2 mA ±5% @ a Reference of 18-30 VDC |
Spectral Noise @ 2.5 Hz | -116 dB/√Hz Maximum |
Broadband | <0.002 RMS Equivalent (2-25 kHz) |
Absolute Phase Shift | <6° @ 2.5 Hz Maximum |
Relative Phase Shift | ±2° @ 2.5 Hz Maximum |
Electrical Isolation | Case Isolated |
Environmental | 960TX |
---|---|
Temperature Range | -35 to +120 °F (-37 to +48 °C) |
Vibration Limit | 500 g Max (Sine) |
Shock Limit | 10,000 g Max |
Physical | 960TX |
---|---|
Finish | Black Anodize per MIL-A-8625 |
Size | 1.50" Hex x 0.900" H(38.1 mm Hex x 22.86 mm H) |
Weight | 3.17 oz (90 gm) |
Case Material | 6061 Aluminum |
Electrical Interface | PC02A-8-4P |
Case Mounting | #1/4-28 Cap Screw |
Accessories Supplied
Hardwood storage case
Certificate of calibration traceable to N.I.S.T
Standard calibration data
Alrad is a provider of high quality scientific equipment to industry and research. The year 2008 ……...
Goodfellow supplies metals, ceramics and other materials to meet the research, development and sp……...
The AutoChem III is a single piece of analytical equipment that acts as acatalyst characterizatio……...
When using the Folding Endurance Testers, a pliable specimen is positioned under a constant tensi……...
The 3542RA averaging axial extensometers from Epsilon are manufactured for conducting compressive……...
TA Instruments’ RPA elite rubber process analyzer (RPA) is an advanced rotorless rotational……...
Item North America is a premier provider of precision ball screws for use as a drive mechanism in linear slides, multi-axis motion and complex material handling devices. item ball screws feature hi……
SurPASS™ 3 is capable of measuring the zeta potential over an extensive range of materials and allows the analysis of varied surface properties and their changes. The zeta potential explains ……
AHP Materials is a specialty materials company focused on the manufacturing and selling of high purity specialty metals and compounds. AHP concentrates mainly on Antimony, Cadmium Sulfide, Telluriu……