Reade Advanced Materials
To provide solutions to improve our customer's quality and productivity, and, in turn, to en……...
Tinius Olsen's extensometers are designed to measure strain, the variation in length of a specimen divided by the specimen’s original length (gauge length). An extensometer measures strain by means of knife edges which contact the sample. This series of extensometer has strain gaged devices.
The models in this series of extensometer can be used to measure either transverse or longitudinal strain, or can be used in combination for defining Poisson’s ratio and ‘r’-value.
The main advantages of using strain gage type extensometers are given below:
Can be left on specimen through failure
Low operating force
Lightweight to minimize any influence on the test
Rugged construction to withstand rigors of operation
SG Models - English Units
Model | Measuring Range | Gage Length | Direction |
---|---|---|---|
SG-20%-2 | 20% | 2 in | Longitudinal |
SG-20%-1.4 | 20% | 1.4 in | Longitudinal |
SG-20%-1 | 20% | 1 in | Longitudinal |
SG-20%-0.5 | 20% | 0.5 in | Longitudinal |
SG-50%-2 | 50% | 2 in | Longitudinal |
SGT-10%-1 | +/- 0.1 in | 0 to 1 in | Transverse |
SG Models - Metric Units
Model | Measuring Range | Gage Length | Direction |
---|---|---|---|
SGM-20%-50 | 20% | 50 mm | Longitudinal |
SGM-20%-25 | 20% | 25 mm | Longitudinal |
SGM-20%-80 | 20% | 80 mm | Longitudinal |
SGM-50%-80 | 50% | 80 mm | Longitudinal |
SGM-50%-50 | 50% | 50 mm | Longitudinal |
SGM-100%-50 | 100% | 50 mm | Longitudinal |
SGMT-10%-25 | +/-2.5 mm | 0 - 25 mm | Transverse |
Picture 1
Picture 2
Picture 3
To provide solutions to improve our customer's quality and productivity, and, in turn, to en……...
ITS leads the world in the application of tomography-based analytical process instrumentation; al……...
The NIVUS NPP0 is engineered for measurements under tough measurement conditions. It has unparall……...
The I8-250 model from INCINER8 is a large scale incinerator. This controlled air incinerator prov……...
L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers’ mis……...
A precision balance is a dependable and accurate weighing device, offering readabilities from 1g ……...
Established in 1991, the Institute of Microelectronics (IME) is a research institute under Singapore’s Agency for Science, Technology and Research (A*STAR). In IME, we focus on delivering hig……
Micropol is based in Stalybridge, Cheshire and has over 30 years experience in polymers. Out technical expertise is world class and out customers world wide. Our extensive in-house facilities allow……
RAS Process Equipment , was established in 1977 and is committed to the design, engineering and manufacturing of quality process equipment for our customers. Equipment can be manufactured to the AS……