The Euclid Heat Treating Company
The Euclid Heat Treating Company was established in 1945 in a garage building at 1408 E. 222nd St……...
R-9340 High Performance Insulation Foam Block
With the LAST-A-FOAM® R-9340 HP, General Plastics expands its offering of insulation foam blocks. The LAST-A-FOAM® R-9340 HP has a compressive strength of 2,100 psi and is engineered to address complex industrial thermal construction applications. It is energy efficient, ready-to-use, and self-extinguishing.
Applications:
The key applications of the R-9340 HP are as follows:
Perimeter fall protection
Column-bearing isolation
Thermal floor reinforcement
Roof equipment support
Canopy/mansard isolation
Tank vessel isolation
Pipe support standard
Tilt-Up/precast panel
| Property | English | Metric | Test Method / Comments |
|---|---|---|---|
| Density (pcf) (kg/m3) | 40 | 641 | Nominal Value |
| Compressive Strength (psi) (kPa) | ASTM D1621 | ||
| Strength @ 2% Deflection | |||
| @ 75 °F | 1,800 | 12,411 | *Certified* Minimum Value |
| Compressive Modulus (psi) (kPa) | ASTM D1621 | ||
| Parallel to Rise | |||
| @ 75 °F | 83,000 | 572,285 | Nominal Values |
| @ 200 °F | 62,000 | 427,490 | Nominal Values |
| Perpendicular to Rise | |||
| @ 75 °F | 95,000 | 655,025 | Nominal Values |
| @ 200 °F | 69,000 | 475,755 | Nominal Values |
| Compressive Strength (psi) (kPa) | ASTM D1621 | ||
| Strength @ 10% Deflection | |||
| @ 75 °F | 4,220 | 29,097 | *Certified* Minimum Value |
| Tensile Strength (psi) (kPa) | ASTM D1623 Type A Specimens | ||
| Parallel to Rise | 1,800 | 12,411 | Minimum Value |
| Perpendicular to Rise | 2,000 | 13,790 | Minimum Value |
| Shear Strength (psi) (kPa) | ASTM D5379 | ||
| Weakest direction | 1,200 | 8,274 | Minimum Value |
| Shear Modulus (psi) (kPa) | ASTM D5379 | ||
| Weakest direction | 27,000 | 186,165 | Nominal Value |
| Thermal Conductivity: | ASTM C518 at 75 °F (24 °C) mean temp. | ||
| (BTU*in/ft2*°F*h) [(W/m*K)] | 0.63 | 0.09 | |
| R-Value (ft2•°F•h/Btu) [(K•m2/W)] | 1.57 | 0.28 | |
| Poisson's Ratio: | ~ 0.3 | ~ 0.3 | Literature (Gibson & Ashby) |
| Hardness, Shore-D (cut foam surface) | 76 | 76 | ASTM D-2240 |
| Water Absorption (lbs/ft2) (kg/m2): | 0.004 | 0.018 | ASTM D-2842 |
| Fire Safety | *S/E | *S/E | *Self-extinguishing via test method shown below |
Values shown are average values determined from laboratory tests, unless otherwise stated.
* FAR 25.853 (A) App. F (a)(1)(i) & (ii) tested vertically on 1/2" thick specimen using 12- and 60- second ignition with a Bunsen burner
[R-9340 High Performance Insulation Foam Block]相关推荐
Atexor Oy
Atexor Oy is a privately-owned Finnish company that specializes in ATEX and IECEx lighting soluti……...
Woodside Petroleum Ltd.
Woodside is an Australian publicly traded oil and gas exploration and production company, with a ……...
Flexometer, Goodrich Flexometer EKT-2002GF from Ektron Tek
Designed and manufactured in accordance with ASTM D623 & ISO 4666 standards. By means of appl……...
[db:国别翻译] United Statestimesavers Inc
/9-9-I-9M-9M-9-9A-9-9G-9G-9E-1/ For over fifty years, Timesavers, Inc. has been providing wideb……...
Measure Shape and Surface Roughness with 3D Laser Confocal Microscopy
Evident’ OLS5000 laser confocal microscope accurately quantifies surface roughness and shap……...
今日仪器
-
Item North America
Item North America is a premier provider of precision ball screws for use as a drive mechanism in linear slides, multi-axis motion and complex material handling devices. item ball screws feature hi……
-
Streaming Answers: SurPASS™ 3
SurPASS™ 3 is capable of measuring the zeta potential over an extensive range of materials and allows the analysis of varied surface properties and their changes. The zeta potential explains ……
-
AHP Materials
AHP Materials is a specialty materials company focused on the manufacturing and selling of high purity specialty metals and compounds. AHP concentrates mainly on Antimony, Cadmium Sulfide, Telluriu……
