The Floor Heating Warehouse
The Floor Heating Warehouse offer electric underfloor heating solutions for tile, wood and lamina……...

Signal Source
MTI’s 1510A portable signal generator and calibrator is considered to be perfect for testing the integrity of sensor signal conditioning electronics. This battery operated function generator, encased in a rugged high visibility shell with a spill proof keypad, is capable of being used in the field, laboratory or factory floor in order to simulate sensor signals. It simulates accelerometer, strain gauge, eddy current and other types of pulse, triangle, sinusoidal or digital pulse trains. The frequency response of the subsequent signal conditioning devices is tested by the sweep function.
A USB port permits remote control and programming of the unit. It is possible to program this signal source generator in order to generate two independent or synchronized signals of different standard signal waveforms (SINE, SQUARE, PULSE and TRIANGLE) and varied frequencies up to 100 kHz. A Channel B provides speed synthesizer signal functionalities such as, odd pulse, sweep function and single pulse.
Click Here to Learn More
Features
Designed for cabling and wiring troubleshooting, machinery speed signal simulation, audio signal simulation, low-voltage bridge mode (microvolt DC output) sensor signal simulation and gas turbine maintenance, the 1510A is capable of producing precise and accurate voltage, charge, and speed signals essential for system troubleshooting, calibration and testing.
Voltage range: 0 to 9.99999 Volts pk
Voltage accuracy of 0.05% ± 0.1 mV
Handheld battery-powered
Portability and features are popular for use among railroad signal servicing, test laboratories, power plant and many other laboratory uses
Has a variable phase control to simulate machinery imbalance conditions
It is also used to simulate low level medical EEG and EKG signals for calibration
Highly accurate DC output can be used for calibrating electronic amplifiers’ gain settings such as strain gauge amplifiers
1510A Portable Signal Generator
Model Specifications
| P/N | Model | Measurement Range | Accuracy | Min. Range | Resolution | Interface | Type |
|---|---|---|---|---|---|---|---|
| 8000-7006K | 1510A | 0 to 9.999 Volts pk | ±0.005% (3 Hz to 100 Hz) | 0.1 Hz | 0.1 mV | BNC coaxial | Handheld |
Accessories
| P/N | Model | Product Description |
|---|---|---|
| 1400-4008 | Carrying Case | Hard shell case with gaskets and molded internal foam to accommodate the 1510A, charger and miscellaneous cables |
| 7500-7522 | Software | Software allows users to preprogram the 1510A memory and to control the 1510A via the included USB remote control cable. |
| 8900-7059 | Aviation Diagnostic Kit | Diagnostic kit for Aircraft instrumentation and cabling |
| 6000-4005 | BNC to BNC Adapter Cable | 10 foot cable with molded strain relief for connecting voltage outputs of the 1510A to ancillary equipment |
| 7500-7509 | Differential Charge Output Adapter Cable | 3 foot cable with stainless steel armor to connect signals to a charge amplifier. Twisted, shielded low MS3106 connector |
| 6000-4007 | Single-ended Charge Output Adapter Cable | 5 foot low-noise cable with micro-dot connectors feeds single ended signals from the 1510A to charge amplifier, or other instruments. |
| 7500-7491 | BNC to Sockets Adapter Cable | With size 22 sockets on one end and BNC connector on the other designed to inject charge signals into connectors (5ft cable) |
| 7500-7492 | BNC to Sockets Adapter Cable | With size 20 sockets on one end and BNC connector on the other designed to inject charge signals into connectors (5ft cable) |
| 7500-7493 | BNC to Sockets Adapter Cable | With size 16 sockets on one end and BNC connector on the other designed to inject charge signals into connectors (5ft cable) |
| 7500-7494 | BNC to Pins Adapter Cable | With 22 pins on one end and BNC connector on the other designed to inject charge signals into connectors (5ft cable) |
| 7500-7495 | BNC to Pins Adapter Cable | With 20 pins on one end and BNC connector on the other designed to inject charge signals into connectors (5ft cable) |
| 7500-7496 | BNC to Pins Adapter Cable | With 16 pins on one end and BNC connector on the other designed to inject charge signals into connectors (5ft cable) |
| 7500-7497 | Differential Charge Output Cable | With size 22 sockets on one end and MS3106 connector on the other designed to inject charge signals into connectors (5ft cable) |
| 7500-7498 | Differential Charge Output Cable | With size 20 sockets on one end and MS3106 connector on the other designed to inject charge signals into connectors (5ft cable) |
| 7500-7499 | Differential Charge Output Cable | With size 16 sockets on one end and MS3106 connector on the other designed to inject charge signals into connectors (5ft cable) |
| 7500-7500 | Differential Charge Output Cable | With 22 pins on one end and MS3106 connector on the other designed to inject charge signals into connectors (5ft cable) |
| 7500-7501 | Differential Charge Output Cable | With 20 pins on one end and MS3106 connector on the other designed to inject charge signals into connectors (5ft cable) |
| 7500-7502 | Differential Charge Output Cable | With 16 pins on one end and MS3106 connector on the other designed to inject charge signals into connectors (5ft cable) |
| 4000-0023-4 | Battery Pack | Pack of 4 NiMH rechargeable batteries |
| 4000-0024 | Battery Charger | Battery Charger |
| 4000-0022A | Wall Adapter | 100-240 VAC |
| 6000-2001 | USB Cable | Connects the 1510A USB port to an external PC for programming and control |
| 7000-7002 | Protective Boot | Protective Case for 1510A |
| 7500-7503 | Cable | RS-232 port to the calibrator for programming and control |
The Floor Heating Warehouse offer electric underfloor heating solutions for tile, wood and lamina……...
梅特勒-托利多仪器广泛应用于研究、科学和质量控制实验室,以及制药、化学、食品和化妆品等行业的众多领……...
/9-9-I-9M-9M-9-9A-9-9G-9G-9E-1/ 从一开始,我们的使命就是加速世界向当地数字制造的过渡。 多亏了我……...
Frain Industries is the world’s largest provider of high quality pre-owned packaging and pr……...
JJ Churchill Ltd. is a precision engineering business in the aerospace, powergen, diesel engine a……...
Viscom develops, manufactures and sells high-quality inspection systems. The product portfolio en……...
Item North America is a premier provider of precision ball screws for use as a drive mechanism in linear slides, multi-axis motion and complex material handling devices. item ball screws feature hi……
SurPASS™ 3 is capable of measuring the zeta potential over an extensive range of materials and allows the analysis of varied surface properties and their changes. The zeta potential explains ……
AHP Materials is a specialty materials company focused on the manufacturing and selling of high purity specialty metals and compounds. AHP concentrates mainly on Antimony, Cadmium Sulfide, Telluriu……