NANOPHOX CS | Next Generation DLS Instrument

As pioneers of photon cross-correlation spectroscopy (PCCS), Sympatec has developed a promisingtechnologybased ondynamic light scattering (DLS) for particle size analysis in the range of 0.5 nm to 10,000 nm.

PCCS - in contrast to photon correlation spectroscopy (PCS) - has the advantage of correctly measuring particle size distributions without the influence of multiple scattered light. Time-consuming sample dilution can be prevented as highly concentrated suspensions or emulsions are directly measured.

NANOPHOX CS takes the established PCCS to anotherlevel with Sympatec’s unique polarisation-separated backscatter PCCS.

Measure up to 100 times higher sample concentration with the NANOPHOX CS than with previous technologies. Image Credit: Sympatec GmbH

Outstanding Performance Features

Measurement times up to ten times faster | Measurements up to less than one minute

Up to one hundred times higher sample concentrations | Measure samples in their original concentration without dilution

Increased accuracy and repeatability ofmeasurement results

Further PCCS Advantages

Effective research, development, and quality control procedures

The elimination of multiple scattering allows for concentration-independent particle characterization

An expansion of standard PCS allows for simultaneous measurements of particle size and stability in opaque suspensions and emulsions

Simple sample preparation without any unnecessary dilution series

Unaffected by contamination of the sample

No required cleanroom conditions

Direct measurement of stability, agglomeration and sedimentation of slightly charged (electro-steric stabilized) to uncharged (steric stabilized) particles of turbid samples

Premature detection of invisible destabilisation (micro agglomeration) of suspensions or emulsions

Highly sensitive to changes in size and measurement of bimodal distributions

Solid-state measuring method for in-situ observation of changes in stability or size, e.g., growth and crystallization processes

Analysis of novel phenomena in high-concentrated materials, such as particle-particle interactions and viscosity variations

Combination of PCS and PCCS allows a wide concentration range

At the push of a button, the PAQXOS software automatically sets all measurement parameters, checks the measurability of the sample before starting the analysis, and outputs the signal quality for orientation during and after the measurement.

The automatic adjustment of the laser intensity and the precise positioning of the cuvette to maximize the measuring signal are particularly user-friendly.

Acrylic glass, glass, solvent-resistant and micro cuvette. Image Credit: Sympatec GmbH

Typical Applications

Polymer emulsions

Paints and inks

Pharmaceutical emulsions

Oxidized particles (aluminum (II) oxide (AIO) or titanium dioxide (TiO₂)) in suspensions

Research on nanodispersions