Mechanical Finishers, Inc.
Mechanical Finishers, Inc. has serviced the Ohio Valley's metal finishing, metal deburring, ……...
The MQR from Oxford Instruments is a low resolution, high performance TD-NMR research system. It is designed for applications based on diffusion and/or relaxation measurements. The system consists of 23 MHz (0.54T) permanent magnet, a high performance digital spectrometer and a selection of interchangeable 10, 18 and 26 mm probes.
The MQR is provided with the Application Developer software package – a completely integrated development environment that allows users to write pulse sequences, run and debug sequences, set parameters and visualize the results. Shaped gradient pulses and shaped RF can be added, and calculations can be embedded in the pulse sequences. An editable library of standard pulse sequences is provided, as well as a standard data analysis software package that includes 1D Inverse Laplace transforms and simple curve fitting.
Extra options include high-strength bipolar pulsed field gradients, variable temperature probes, T1 rho capability and advanced data analysis including 2D Inverse Laplace transforms.
Operating frequency | 23 MHz (0.54T field) |
Probe sizes (diameter) | 10mm, 18mm, 26mm |
Probe deadtime | <5 µs (10 mm probe); <8 µs (18 mm probe); <12 µs (26 mm probe) |
P90 (10 mm probe) | <3 µs |
Data sampling rate | Dependent on filters, typically 16 MHz/16 bit |
Data point capacity |
>256 k |
RF Power | 250 W |
RF duty cycle | 20%; 40% optional for T1 rho |
Pulsed field gradients | Up to 350G/cm (depending on probe) |
Available pulse sequences | FID, CPMG, T1 inversion recovery, T1 saturation recovery, solid echo, FID/Hahn, 1-D profile (requires gradients), diffusion (requires gradients) |
Liquid-controlled variable temperature probe | 10 mm or 18 mm, -10 to +80 °C (requires additional equipment) |
Gas-controlled variable temperature probe | 10 mm or 18 mm, -30 to +150 °C (requires additional equipment and depends on the temperature of the incoming gas) |
Mechanical Finishers, Inc. has serviced the Ohio Valley's metal finishing, metal deburring, ……...
The CANNON® CAV4.1 is a fully-automated, single-bath, benchtop viscometer for unattended ASTM……...
PMDTechnologies GmbH was founded in 2002, a 50% subsidiary of Audi Electronics Venture GmbH. PMDT……...
Creative Materials develops and markets highly conductive adhesives and inks that can be applied ……...
We are proud to be an American manufacturer that provides temperature measurement instrumentation……...
AMETEK Sensors, Test & Calibration (STC) is one of the world’s leading manufacturers of……...
The Angel Drill Bit provides improved safety by decreasing liklihood of mesh entanglement. Features: Available in 27 and 28mm M16 Successfully trialled in NSW coal mines Minimises risk of entanglem……
Jetcrete Australia is the largest specialised shotcrete contractor in Australia and has been successfully operating for over 28 years with current projects throughout WA and the Eastern States, pro……
For over 25 years, Borealis has been a leading provider of polyolefins, base chemicals, and fertilizers. In line with its mission to Keep Discovering, innovative solutions made possible by Borealis……