eMagin Corporation
eMagin dedicated to delivering high-quality, high-resolution video and data information in virtua……...
LTP-250MicroPress
The LTP-250 Micro-Press™, from Lambient Technologies, is a compact pneumatic press. The system is designed for general use in applying pressure and heat to materials.
The LTP-250 Micro-Press™ can be used with or without a dual temperature controller. With the Lambient Technologies dual temperature controller, separate temperature control of each platen can be achieved.
The heating temperature ranges from ambient to 350ºC or 660ºF, and the highest applied force is 680 Kg (1500 lb). Platen area measures 75 mm x 75 mm (3.0” x 3.0”).
The LTP-250B Micro-Press™ can also be used to cure BMC, SMC, polyurethanes, polystyrenes, polyesters, epoxies, laminates, silicones, and other similar polymeric materials.
It can be manually controlled using the Lambient Technologies™ CureView™ software, and offers a portable and easily operated platform to recreate the time-pressure-temperature processing profiles of a large number of polymers.
The LTP-250B Micro-Press™, when combined with the Lambient Technologies™ dielectric sensors, functions as a complete testing station for dielectric cure analyses.
Specifications
The specifications of the LTP-250 Micro-Press™ are given below:
| Overall | |
|---|---|
| Environmental conditions | |
| Temperature | 0°C to 55°C (32°F to 131°F) |
| Relative Humidity | 90% RH max, non-condensing |
| Press Unit | |
| Cylinder diameter | 100 cm (4”) |
| Maximum input air pressure | 8.25 bar (120 psi) |
| Maximum applied force | 680 Kg (1500 lbs) |
| Control | Pneumatic logic, no electrical power required
Two “CLOSE” buttons requiring simultaneous continuous actuation to close press Press latches closed at end of stroke One “OPEN” button requiring momentary actuation to open press Pressure regulator to control air pressure and applied force |
| Pneumatic connection | Nylon or polyurethane tubing 10 mm O.D., 1.5 mm wall thickness, rated for 8.25 bar (120 psi) |
| Stroke (max. platen separation) | 11.4 cm (4.5”) without Ceramicomb™ sensor plate, approximately 8.9 cm (3.25") with sensor plate |
| Platen dimensions | 75 x 75 mm (3” x 3”) |
| Press dimensions (H x W x D) | 71.9 x 44.2 x 48.3 cm (28.3” x 17.4” x 19.0") |
| Press weight | 23 Kg (50 lbs) |
| LTT-203B Temperature Controller Option | |
| Total heater power | 450 W (225 W/platen when used with temperature controllers) |
| Working temperature | ambient to 350°C (ambient to 660°F) |
| Thermocouples | Type J, one in each platen |
| For 110 VAC configuration (specify mains voltage when ordering): | |
| Mains voltage | 110 VAC ± 10% |
| Mains frequency | 50 - 60 Hz |
| Max press current | 4.0A |
| Fuses | 5 x 20 mm, 8 A, 250 V |
| For 220 VAC configuration (specify mains voltage when ordering): | |
| Mains voltage | 220 VAC ± 10% |
| Mains frequency | 50 - 60 Hz |
| Max press current | 4.0A |
| Fuses | 5 x 20 mm, 8 A, 250 V |
| Controller communications | RS-485, USB with adapter |
[LTP-250MicroPress]相关推荐
KMLabs
KMLabs has a long track record of bringing the most advanced ultrafast laser technologies to mark……...
JH Analytical Labs
JH Analytical Labs, located in Fremont, CA, the epicenter of Silicon Valley, was launched in May ……...
Drilling Bits from Hard Rock Mining Products Ltd
Hardrock Mining Products carries a variety of drill bits for soft rock mining applications. Our b……...
Arctic Drilling Company Ltd
Arctic Drilling Company Oy Ltd manufactures diamond core drilling machinery and exploration drill……...
DIL 802 Differential Dilatometer from TA Instruments
TA Instruments’ DIL 802/802L differential horizontal dilatometer has been specifically desi……...
今日仪器
-
Institute of Microelectronics
Established in 1991, the Institute of Microelectronics (IME) is a research institute under Singapore’s Agency for Science, Technology and Research (A*STAR). In IME, we focus on delivering hig……
-
Micropol Limited
Micropol is based in Stalybridge, Cheshire and has over 30 years experience in polymers. Out technical expertise is world class and out customers world wide. Our extensive in-house facilities allow……
-
RAS Process Equipment
RAS Process Equipment , was established in 1977 and is committed to the design, engineering and manufacturing of quality process equipment for our customers. Equipment can be manufactured to the AS……
