EMGA-921 from Horiba Scientific
The EMGA-921 is hydrogen elemental analyzer with high accuracy and repeatability suiting to cutti……...
LabRAM Soleil Nano for Real-time and Direct Correlative Nanoscopy
LabRAM Soleil Nano for Real-time and Direct Correlative Nanoscopy from Horiba is a completely combined system based on the OmegaScope scanning probe microscope and LabRAM Soleil Raman microscope. LabRAM Soleil Nano provides unparalleled abilities for photoluminescence and direct co-localized AFM-Raman measurements.
AFM imaging modes (electrical, topographic, mechanical, etc.) and Raman acquisition could be executed sequentially or concurrently at the same location of the sample surface. Optical nano-resolution is achievable with Photoluminescence (TERS/TEPL) and Tip-Enhanced Raman Spectroscopy.
LabRAM Soleil Nano is consistent with the environmental chamber for AFM and Raman measurements in a controlled atmosphere and at low temperatures.
Characteristics
Multi-Sample Analysis Platform
Macro, micro, and nanoscale measurements can be conducted on the same AFM-Raman platform.
Multi-Technique/Multi-Environment
Several SPM (scanning probe microscopy) modes, such as AFM, force curves measurements, conductive and electrical modes (KPFM, cAFM,), STM, liquid cell and electrochemical environment, collectively with chemical mapping via TERS/TEPL.
Complete control of the acquisition via one workstation and strong software control. SPM and Raman or PL microscope could be made in an independent or simultaneous manner.
Compatible with the AFM chamber available for humidity control, environmental control, and cooling sample holder.
Robustness/Stability
High resonance frequency AFM scanners. High performance is achieved without active vibration isolation.
Ease-of-Use
Completely automated operation, start quantifying within a matter of minutes.
High Collection Efficiency
Top-down and oblique Raman/PL detection are available with high numerical aperture objectives for utmost resolution and throughput in both co-localized and tip-enhanced measurements (Photoluminescence and Raman).
High Throughput Multimodal UV-VIS-NIR Achromatic Platform
Developed for Photoluminescence, Raman, Electroluminescence, and more.
Up to four internal lasers and six different filters are available; four-grating turret.
High Spatial Resolution
Nanoscale spectroscopic resolution (down to 10 nm) via Tip-Enhanced Optical Spectroscopies (TERS: Tip-Enhanced Raman Spectroscopy, and TEP: Tip-Enhanced Photoluminescence).
Super-Low Cut-Off Frequency
Down to 30 cm-1 with high throughput.
Ultrafast Raman Imaging
SmartSampling™-100 times faster Raman maps - hours of work are converted into minutes
3D Raman lightsheet confocal imaging with patented Q-Scan™
Specifications
SmartSPM Scanner and Base
Scanning type by sample: XY non-linearity 0.05 %; Z non-linearity 0.05 %
Sample scanning range: 100 µm × 100 µm × 15 µm (±10 %)
Noise: 0.1 nm RMS in XY dimension in 200 Hz bandwidth with capacitance sensors on; 0.02 nm RMS in XY dimension in 100 Hz bandwidth with capacitance sensors off; < 0.04 nm RMS Z capacitance sensor in 1000 Hz bandwidth
X, Y, Z movement: Digital closed loop control for X, Y, Z axes; Motorized Z approach range is to around 18 mm
Resonance frequency: XY: 7 kHz (unloaded); Z: 15 kHz (unloaded)
Sample positioning: Tracked sample positioning range 5 × 5 mm
Sample size: Maximum 40 × 50 mm, thickness of 15 mm
Positioning resolution: 1 µm
AFM Head
Registration system noise: Down to < 0.1 nm
Alignment: Completely automated cantilever and photodiode alignment available
Laser wavelength: 1300 nm, non-interfering with spectroscopic detector
Probe access: Free access to the probe for additional external manipulators and probes
SPM Measuring Modes
Contact AFM in air/(liquid optional); Semicontact AFM in air/(liquid optional); Non-contact AFM; Lateral Force Microscopy (LFM); Phase imaging; Conductive AFM (optional); Force Modulation; Magnetic Force Microscopy (MFM); Capacitance and Electric Force Microscopy (EFM); Nanomanipulation; STM (optional); Volt-ampere characteristic measurements (optional); Kelvin Probe (Surface Potential Microscopy, SKM, KPFM); Force curve measurement; Piezo Response Photocurrent Mapping (optional); Force Microscopy (PFM); Nanolithography.
Spectroscopy Modes
Options
Temperature control for liquid cell: Heating up to 60 °C
Environmental chamber
Humidity control system: Relative humidity range 10 to 85%/Relative humidity stability ±1%
Heating module: Heating up to 300 °C/Temperature stability 0.1 °C, or heating up to 150 °C/Temperature stability 0.01 °C
Combined Shear-force and Normal force tuning fork holder
Signal Access Module
Liquid Cell or Electrochemical Cell available
Heating Cooling module: Ranges from –50 °C to + 100 °C
STM holder available
Conductive Unit: Current range 100 fA to 10 uA/3 current ranges (100 nA, 1 nA, and 10 µA) switchable from the software
Optical Access
Closed loop piezo objective scanner available for ultra-stable long-term spectroscopic laser alignment: Range 20 µm × 20 µm × 15 µm; Resolution: 1 nm
Ability to use concurrently top and side plan apochromat objective: Up to 100×, NA = 0.7 from top or side; Up to 20× and 100× concurrently
Spectrometer
Standard wavenumber cut-off: 30 cm-1, with edge filters for 532, 638, and 785 nm wavelengths, injection rejection, >99% transmission.
Spectrometer scanning speed: Ranges up to 400 nm/second, with 600 g/mm grating, fixed on a standard 4-grating turret.
External lasers: Has no limit, for large gas and ultrafast lasers normally.
Wavelength range: UV-VIS-NIR; Broadband high throughput achromatic mirror-based system, improved from 300 nm to 1600 nm without altering optics.
Built-in lasers: Ranges up to 4 Solid-state lasers, NUV to NIR wavelengths available.
Fast Imaging: <1 millisecond/spectrum SWIFT, SWIFT repetitive, SWIFT XS EMCCD, SWIFT eXtended Range, and SmartSampling for ultrafast imaging.
Number of gratings: Unlimited; 4-grating exchangeable motorized turret.
Software
Combined software package, including complete featured SPM, spectrometer and data acquisition control, spectroscopic, and SPM data analysis and processing suite, such as deconvolution and filtering, spectral fitting, optional modules include univariate and multivariate analysis suite (PCA, HCA, MCR, DCA), particle detection and spectral search functionalities.
[LabRAM Soleil Nano for Real-time and Direct Correlative Nanoscopy]相关推荐
Accurpress America Inc
The Accurpress Company introduced their revolutionary new press brake design to the machine tool ……...
KOPIN Corporate
Kopin is a leading developer and provider of critical components for wearable headset products. I……...
RIEGL Laser Measurement Systems GmbH
With more than 30 years experience in the research, development and production of laser rangefind……...
Padtec S/A
Padtec is based in Brazil and is the largest optical communications manufacturer in South America……...
Diamond Core bit from Guizhou Sinodrills Equipment Co.Ltd.
Diamond Core bit is the most important part in terms of diamond core drilling tools, according to……...
今日仪器
-
ANGEL BIT from Quarry Mining & Construction Equipment Pty Ltd
The Angel Drill Bit provides improved safety by decreasing liklihood of mesh entanglement. Features: Available in 27 and 28mm M16 Successfully trialled in NSW coal mines Minimises risk of entanglem……
-
Jetcrete Australia
Jetcrete Australia is the largest specialised shotcrete contractor in Australia and has been successfully operating for over 28 years with current projects throughout WA and the Eastern States, pro……
-
Borealis AG
For over 25 years, Borealis has been a leading provider of polyolefins, base chemicals, and fertilizers. In line with its mission to Keep Discovering, innovative solutions made possible by Borealis……
