IsoAir® Pro-Plus Remote Particle Counter

The IsoAir^® Pro-Plus Remote Particle Counter employs cutting-edge technologies to streamline cleanroom monitoring, providing a straightforward yet potent solution that complies with global regulations.

This device’s data can seamlessly integrate with either Particle Measuring Systems’ FacilityPro^® Monitoring System or Facility Net software. Furthermore, it offers the flexibility of third-party communication options, including Modbus TCP/IP and optional PMS TCP/IP protocols.

Housed within a rugged 316 L stainless steel enclosure, this instrument boasts liquid resistance and possesses IP65 and NEMA 4× ratings.

A quick-release mounting bracket conveniently stores crucial sensor data, such as the IP address at the measurement point. This reduces the time and complexity associated with unit installation after calibration or servicing.

The Isokinetic Sampling Probe (ISP) can be affixed directly to the inlet, extended from the particle sensor using rigid stainless steel tubing, or remotely positioned using flexible tubing in virtually any installation scenario.

The IsoAir Pro-Plus Remote Particle Counter is a hassle-free remote particle sensor that requires no intricate reprogramming. It comes equipped with its own blower, eliminating the need for an external vacuum, and operates with either 100 to 240 VAC or 24 VDC input power.

Benefits

Quick, real-time alerts of contamination issues

An essential component of a Contamination Control Strategy

Improved connectivity and user-friendliness

Interfaces with Particle Measuring Systems’ FacilityPro SCADA NG, Pharmaceutical Net Pro, or Facility Net software for comprehensive data management

Reduced installation time and lowered error risk with data stored in the mounting bracket

Reliable, with minimal risk of data loss (saves 3,000 samples in case of communications outage)

Quick-release mounting bracket streamlines calibration and servicing

Durable laser diode reduces long-term maintenance time

Cost-effective cleanroom monitoring: No central vacuum system required

Chemically resistant IP 65 and NEMA 4X rated enclosure

Flexible ISP mounting options increase installation choices and reduce installation expenses

Features

2-8 selectable channel sizes and 2-channel Pharmaceutical mode

24 VDC and 100 - 240 VAC input power

Automatic shut-off for capped probe

Built in blower with HEPA-filtered exhaust

Compliance with ISO 21501-4:2018 and CE standards, optional ISO 17025 calibration

Flow rate of 1.0 CFM

IP65 and NEMA 4X rated 316L stainless steel enclosure

Modbus TCP/IP or optional PMS TCP/IP communications

Optional digital output and analog inputs and outputs

Optional wireless communication

Two local LEDs for status and activity

VHP resistance

Applications

Particle monitoring system designed for pharmaceutical manufacturing areas

Specialized particle monitoring for isolators

Suitable for aerospace and industrial applications

Cleanroom particle monitoring system

Specifications

Source: Particle Measuring Systems

.	.	.
Channel Options	2 - 8 configurable channels from 0.3 to 25.0 μm. 2-channel Pharmaceutical Mode for 0.5 and 5.0 μm.
Flowrate	1.0 CFM ± 5% (28.3 LPM)
Vacuum Source	The internal blower is quiet, cool-running, and long-lived, with no contaminating carbon vanes. The pump output is HEPA-filtered and discharged from the bottom of the enclosure.
Pump Shutoff	An automatic shutoff activates if the blower fails or if the system detects that the probe cap is on the sample probe while running. The system will automatically try to restart based on the user-defined configuration.
Calibration	Calibration materials used are traceable to the US National Institute of Standards and Technology (NIST).The unit is calibrated to ISO 21501-4:2018 requirements. ISO 17025 calibration is optional.
Zero Count Level	≤ 7.07 counts/m³
Maximum Concentration¹	> 42,924,662 particles/m³
Exterior Surface	Stainless steel (Grade 316 L)
Communications	Ethernet communication via:- Modbus TCP/IP, or - PMS TCP/IP (optional)- Four (4) 4-20 mA inputs, 24 VDC nominal (optional)- Three (3) 4-20mA output: Two (2) for particle data, one (1) for alarm indication (optional)- Five (5) Solid State Relay outputs, 48 V, 0.5 A (optional)
Controlling Software	FacilityPro processor with any of the following PMS-provided software:- FacilityPro SCADA NG- Pharmaceutical Net Pro- FacilityPro SMART NGFacility Net softwareModbus TCP/IP client software
Wireless (Optional)	WiFi 802.11b/g, WPA, WPA2, WEP
Data Security	Unalterable data. 21 CFR Part 11 compatible transfer to PMS-provided software. Backup storage of 3,000 samples, including flow data (volume, status, etc).
Status Indicators	EthernetProgrammable	Status: Two-color LEDActivity: One-color LED
Dimensions (w x h x d)	11.7 x 10.2 x 5.0 in (29.7 x 26.0 x 12.6 cm)
Weight	8.8 lb (4.0 kg)
Power	AC: 100 - 240 VAC 50/60 Hz, 1.15 ADC: 24 VDC ± 10%AC input voltage fluctuation shall not exceed +/-10%
Laser Classification	Class 1, complies with US 21 CFR 1040.10 and EN60825-1. An internal, enclosed Class 3B laser is used per EN60825-1.

¹ Less than 10% coincidence loss at maximum recommended ambient concentration.

标签：Particle Counters Physical Properties Testing

[IsoAir® Pro-Plus Remote Particle Counter]相关推荐

ANGEL BIT from Quarry Mining & Construction Equipment Pty Ltd

The Angel Drill Bit provides improved safety by decreasing liklihood of mesh entanglement. Features: Available in 27 and 28mm M16 Successfully trialled in NSW coal mines Minimises risk of entanglem……

仪器产品 2025-04-28
Jetcrete Australia

Jetcrete Australia is the largest specialised shotcrete contractor in Australia and has been successfully operating for over 28 years with current projects throughout WA and the Eastern States, pro……

代理品牌 2025-04-28
Borealis AG

For over 25 years, Borealis has been a leading provider of polyolefins, base chemicals, and fertilizers. In line with its mission to Keep Discovering, innovative solutions made possible by Borealis……

代理品牌 2025-04-28