HSLIS-M50e Water Particle Counter

The High Sensitivity Liquid in Situ (HSLIS) e-Seriesparticle counter offers consistent, real-time monitoring of contamination levels in process chemicals and DI water. It is perfect for situations requiring a large number of sensors and long-term trends because of its low cost and high sensitivity.

The sizingsensitivity of the HSLIS e-Series is 0.05 µm in DI water and 0.065 µm in process chemicals.

Integration of the HSLIS e-Series into Particle Measuring Systems’ Facility Net software provides a way to monitor various flow systems at a cheap cost and offers dedicated local display and control capabilities.

Benefits

Monitor for long-term trends in fluid quality

Control and monitoring of several particle counters via Ethernet

Low initial capital investment and lower maintenance costs with theproven reliability of the HSLIS design

Tabular and statistical process control (SPC) charts provide detailedstatistical information

Alphanumeric paging and e-mailing tools to notify the operator of data deviations

Sensor status shows a four-level alert for monitoring out-of-spec conditions

Simplified data interpretation using real-time and retrieved time charts

Features

Size range of 0.05, 0.1, 0.15, and 0.2 µm

Four channels

Operates with an optimal flow rate of 100 ml/min ±10 %

Samples 0.25 % of the flow volume or 0.25 ml/min

Facility Net software compatible

An existing network can be used with ethernet connectivity to Facility Net software

Applications

Particle tracking in real-time withchemical distribution systems

Chemical packaging operations management

Efficiency characterization and chemical filter performance

Performance testing of chemical handling components’

Point-of-process monitoring

Specifications

Source: Particle Measuring Systems

	M50e	M65e	M100e
Size range	0.05 – 0.2 μm	0.065 – 0.2 μm	0.1 – 1.0 μm
Channels	4
Channel sizes	0.05, 0.1, 0.15, 0.2 μm	0.065, 0.1, 0.15, 0.2 μm	0.1, 0.2, 0.5, 1.0 μm
Flow rate	100 ml/min ± 10 %	100 ml/min ± 10 %	300 ml/min ± 10 %
Sample volume	0.25 ml/min	0.6 ml/min	3.0 ml/min
Counting efficiency	100 % of sample volume
Maximum concentration	10,000 counts/ml
Sampletemperature	194 °F (90 °C)	212 °F (100 °C)	212 °F (100 °C)
Zero count	< 1000 counts/liter	< 2000 counts/liter	< 1000 counts/liter
Wetted surface materials	Delrin^®, Kel-F^®, Teflon^®, Viton^®, fused silica	Kalrez 4079, Kel-F, Teflon, sapphire	Kalrez 4079, Kel-F, Teflon, sapphire
Dimensions(L x W x H)	21 x 10.75 x 7 in (53 x 27 x 18 cm)
Weight	28 lb (13 kg)
Power	85 – 250 VAC, 50 – 60 Hz
Calibration	Materials used are traceable to US National Institute of Standards and Technology (NIST) and/or Japanese Institute of Standards (JIS).
Environment	Temperature: 50 – 95 °F (10 – 35 °C); Humidity: non-condensing
Communications	Ethernet, 4-20 mA (5 outputs; 4 particle channels, 1 instrument status)RS-232 (set-up and diagnostics, no data)

*Greater than 90 % accuracy (less than 10 % coincidence loss) at maximum recommended concentration.

标签：Particle Counters Physical Properties Testing

[HSLIS-M50e Water Particle Counter]相关推荐

NIRS DS2500 Near-Infrared Analyzer from Metrohm

Institute of Microelectronics

Established in 1991, the Institute of Microelectronics (IME) is a research institute under Singapore’s Agency for Science, Technology and Research (A*STAR). In IME, we focus on delivering hig……

代理品牌 2025-07-30
Micropol Limited

Micropol is based in Stalybridge, Cheshire and has over 30 years experience in polymers. Out technical expertise is world class and out customers world wide. Our extensive in-house facilities allow……

代理品牌 2025-07-30
RAS Process Equipment

RAS Process Equipment , was established in 1977 and is committed to the design, engineering and manufacturing of quality process equipment for our customers. Equipment can be manufactured to the AS……

代理品牌 2025-07-30