HEXECO, Inc.
HEXECO, Inc., founded in 1976, is a privately-held corporation specializing in the design and man……...
HPD II for Reduced Gas Pressure
The HPD II decreases the pressure of high purity, high-pressure gas to near atmospheric pressures, allowing for accurate sampling of aerosol particle size channels of 0.1 m and above by PMS particle counters with a volumetric sample flow rate of 1.0 CFM.
The HPD operates by diffusing some of the gas out of the system, allowing the particle counter’s flow-metering mechanism to function properly. The HPD II is compatible with PMS particle counters, includingAirNet, IsoAir, Lasair Pro, and Lasair III.
The HPD II successfully reduces the pressure of a gas line from 150 psi to atmospheric pressure and is compatible with non-toxic, nonflammable gases such as Clean Dry Air (CDA), nitrogen (N2), argon (Ar), and carbon dioxide (CO2).
Two configurations of HPD II are offered:
HPD II-100 for gas lines between 40 and 100 psi
HPD II-150 for gas lines between 75 and 150 psi
Source: Particle Measuring Systems
| Particle Counter | CDA | N2 | Ar | CO2 | O2/He/Ne/H2 |
|---|---|---|---|---|---|
| Airnet | Y | Y | N | N | N |
| Lasair III 110 | Y | Y | N | N | N |
| Lasair III 310 | Y | Y | Y | N | N |
| IsoAir 310P | Y | Y | Y | N | N |
| IsoAir Pro-E/Plus | Y | Y | Y | Y | N |
| Lasair Pro | Y | Y | Y | Y | N |
| HPGP 101-C | Y | Y | Y | Y | Y |
Benefits
Two types for reducing high-pressure gas from 40 to 100 psi or 75 to 150 psi to atmospheric pressure
Able to measure particles as tiny as 0.1 µm in CDA, nitrogen, carbon dioxide, or argon when usedin combination with a Lasair II-110 or Lasair III-110 particle counter
Use with nitrogen (N2), carbon dioxide (CO2), argon (Ar), clean dry air (CDA), or other non-toxic inert gases (see table for compatible gases)
No external flow meters are needed
Using atmospheric pressure particle counters to monitor pressured gases economically
Features
Developed specifically to work with the 1.0 CFMaerosol particle counter
No moving parts to wear
Specifically intended to be used with the 1.0 CFM aerosol particle counter
The particle counter is not affected by interruptions in the gas supply
Stainless steel construction
Applications
AirNet: 310, 510
IsoAir: 310P, Pro-E, Pro-Plus
Lasair Pro 310
Lasair III: 110, 310, 310P
Specifications
Source: Particle Measuring Systems
| . | . |
|---|---|
| Pressure | See additional table below |
| Applicable Sample Flow Rate | 1.0 CFM |
| Particle size range | 0.1 – 1.0 μm |
| Environment | Temperature: 50 – 90 ºF (10 – 32 ºC). Humidity: Non-condensing. |
| Material | Enclosure: 316 L stainless steel body, exhaust filterGaskets: 316 stainless steel, Buna-N O-rings |
| Inlet fitting | Male 4-VCR fitting, #4 size, class 316 L stainless steel with Ruby orifice |
| Exhaust fitting | 3/8” ID with O-ring seal |
| Tubing length | 1 m (39.4 in) maximum |
| Dimensions (h, w, d) | 5.1 x 9.8 x 5.5 in (13 x 25 x 14 cm) |
| Weight | 5.8 lb (2.6 kg) |
| Compatible instruments | See the Applications section on the previous page |
| Flow Rate | CDA | Nitrogen | Argon | CO2 | |
|---|---|---|---|---|---|
| HPD II 100 | 1.0 CFM | 40-100 psi | 40-100 psi | 40-100 psi | 40-100 psi |
| HPD II 150 | 1.0 CFM | 75 - 150 psi | 75 - 150 psi | 75 - 150 psi | 75 - 150 psi |
System components included: mounting brackets and exhaust tubing to particle counterNot included: particle counter, ISPs sample tubing, communications cables, PC, FacilityNet or Pharmaceutical Net software
[HPD II for Reduced Gas Pressure]相关推荐
ZEISS SteREO Discovery.V12 Stereo Microscope
The V12 Stereo Microscope from ZEISS is the motorized component of the SteREO Discovery. It is co……...
![[db:国别翻译]美国分析](/wp-content/uploads/15upplier15/full_site_logo.png){kind=logo}
[db:国别翻译]美国分析
Beta Analytic Inc. 成立于 1979 年，总部位于佛罗里达州迈阿密，致力于满足放射性碳测年的需求，并快……...
DVS Intrinsic Plus - Dynamic Gravimetric Vapor Sorption Analyzer
The DVS Intrinsic plus is a high-sensitivity, rapid and precise technique for automated determina……...
![[db:国别翻译] GermaneLenser过滤GmbH](/wp-content/uploads/42upplier42/full_site_logo.png){kind=logo}
[db:国别翻译] GermaneLenser过滤GmbH
LENSER 是一家专注于压滤机固液分离滤芯制造的国内外知名企业。LENSER 是该领域的全球市场领导者。 我……...
NMC Resource Corporation
NMC Resource Corporation ("NMC") is a TSX Venture listed public company engaged in natu……...
今日仪器
-
Item North America
Item North America is a premier provider of precision ball screws for use as a drive mechanism in linear slides, multi-axis motion and complex material handling devices. item ball screws feature hi……
-
Streaming Answers: SurPASS™ 3
SurPASS™ 3 is capable of measuring the zeta potential over an extensive range of materials and allows the analysis of varied surface properties and their changes. The zeta potential explains ……
-
AHP Materials
AHP Materials is a specialty materials company focused on the manufacturing and selling of high purity specialty metals and compounds. AHP concentrates mainly on Antimony, Cadmium Sulfide, Telluriu……
