Flow Sensors for Fuels and Oils

Features

Fuel and oil flow meters with Aluminum body

Temperatures up to 80 °C

FKM Seals

DIN, JIS or ANSI Flanges optional (available on 1", 1½" and 2" Sizes)

NPT or BSP Threads

Description

The FPD3000 Series fuel and oil flow meters are accurate and affordable positive displacement flowmeters. A major feature is the ability to maintain a consistent level of accuracy despite changes in viscosity.

The excellent dynamic response and solid construction of the meter make it particularly well suited to the measurement of oils, fuels, and other non-abrasive lubricating fluids. No straight run piping is required upstream or downstream of the flowmeter, making the FPD3000 flowmeters simple to use and to install. In addition, at low flow rates, the meter has good resolution and high accuracy.

Specifications

Accuracy: ±0.5% of reading, ±1.0% of reading (1/4" models)

Repeatability: ±0.03%

Fitting Type:

NPT: Female

BSP: “-BSP” option

DIN: “-DIN” option

JIS: “-JIS” option

ANSI: “-ANSI” option

Hall-Effect Sensor Power: 4.5 to 24 Vdc (7.5 mA)

Reed Sensor Power: 30 Vdc (500 mA)

Output Options:

Pulse Output: Standard

4 to 20 mA Transmitter: “-D-A” option; no output on battery powered “-D” model FPD3003 FPD3005D-A Both models shown smaller than actual sizer.

Display: 7-digit/12 mm (0.47") upper, 7-digit/7 mm (0.28") lower all “-D” options

Rate: User defined

Total: Resettable

Acc-Total: Non-resettable

Minimum Viscosity: 1cPs

Maximum Viscosity: 1000 cPs standard

Maximum Pressure: See chart on page F-3

Strainer Size: See chart on next page

Mounting: Shafts must be in a horizontal plane

Electrical Connections: 2 x 12 mm (0.08 x 0.47"), fittings included “-D-A” option

Cable Length: 1 m (3') stripped ends non-display models

Mounting: Pipe

Power: 4 to 20 mA, “-D-A” models 18 to 30 Vdc display, “-D” models 3 Vdc lithium battery (included)

Liquid Temperature: -40 to 80 °C (-40 to 176 °F)

Materials

Body: Aluminum

Enclosure: Polypropylene

Seals: FKM

Fasteners: Stainless steel

Cable Insulation: PVC

Enclosure: NEMA 6 (IP67)