Global Valves and Engineering
Global Valves and Engineering was established in 2002 to provide contractors and end-users with a……...
EMIA-Pro Carbon/Sulfur Analyzer
The EMIA-ProCarbon/Sulfur Analyzer is based on HORIBA’s widely respected expertise in Non-Dispersive Infrared (NDIR) technology.
It provides durability, enhanced cleaning efficiency, improved user-friendly software, operability, and maintenance to guarantee effective measurements, and its shortened cycle time expedites the development and manufacturing speed of the users.
Features
Long MTBM (Mean Time Between Maintenance)
The newly-developed, unique cleaning mechanism (patent pending)clears the dust in the furnace, allowing the operator to continue to use the EMIA-Expert/Pro without maintenance cleaning for up to 200 measurements.*
*It relies on sample and measurement condition
Before measurement. Image Credit: Horiba Scientific
After 200 measurements. Image Credit: Horiba Scientific
High Throughput
The EMIA Series is able to complete one measurement cycle, “measurement-display result-cleaning,” in 70 seconds (that is, around 50 samples/hour).
Fast and Easy Maintenance
With the availability of the latest innovations, the cleaning time for the EMIA Series instruments is normally half that of the traditional models. The flat design near the crucible stands and the simple design beside the furnace also ease user access for cleaning.
Flat design around the crucible stand. Image Credit: Horiba Scientific
Advanced Operation Software
A strong focus was to guarantee that the EMIA-Expert/Pro Series was “easy-to-use.” Specifically, the Company focused on the layout, operating menus, and functions.
HORIBA has included a self-diagnostic monitor checking capability to check the connected device’s status, as well as an alarm function andthree navigators to enable daily operation.
Image Credit: Horiba Scientific
Analysis Navigator
This function uses the suggested best measurement flow and operating conditions based on experience.
Troubleshooting Navigator
Automatic diagnosis system and troubleshooting navigator.
Maintenance Navigator
Periodic preventive maintenance work navigator by photos and videos.
Upgradable
The customer can extend the system’s functionality anytime based on their requirements, even after installation.
Upgrades include:
Carrier gas purifier available for ultra-low concentration carbon measurement
Halogen trap unit available
Auto-sampler (20 positions)
Specifications
Source: Horiba Scientific
| Contents | EMIA-Pro | |
|---|---|---|
| Required sample amount | 1 g ± 0.1 g | |
| Typical Meas. time | 70 seconds/cycle | |
| Carbon | Meas. Range (m/m) | 1.6 ppm - 6.0% |
| Blank accuracy | σn-1≦ 0.8 ppm | |
| Sulfur | Meas. Range (m/m) | 2.0 ppm - 1.0% |
| Blank accuracy | σn-1≦ 1.0 ppm | |
| Sample Meas. Accuracy | Carbon | σn-1≦ 2.0 ppmor RSD≦1.0% |
| Sulfur | σn-1≦ 2.0 ppmor RSD≦1.5% | |
| Utility | Carrier gas | Oxygen(Purity; 99.5%, Pressure; 0.30-0.33 MPa) |
| Operation gas | Nitrogen(Purity; 99.5%, Pressure; 0.35-0.38 MPa) | |
| Power | 200/220/240 V, 50/60 Hz, 5 kVA | |
| Dimensions | Main unit* | 500 (W) x 725 (D) x 710 (H) mm |
| Mass | Main unit | approximately 134 kg |
| Data processing and operation | USB data communication with PC Windows 8.1Touch panel or Key board and mouse operation | |
| Model name | EMIA-20P: Carbon/SulfurEMIA-21P: CarbonEMIA-22P: Sulfur | |
(Note) "ppm" is equal to mg/kg.
*Except piping parts, projection parts (D:79mm) and flow meter on the back side.
Schematics
Image Credit: Horiba Scientific
Accessories
Crucible Pre-Heating Unit
The crucible pre-heating unit, FK-100 with automatic transportation function, heats a ceramic crucible to 1100° in just 10 minutesbefore analysis.
Image Credit: Horiba Scientific
Autosampler
Automation crucible loading and disposing unit. Up to 20 pieces of crucible are available.
Consumables
Ceramic Crucible
Low carbon blank and high dimension tolerance are available for high-precision analysis.
Image Credit: Horiba Scientific
Accelerators
High-purity materials that assist stable analysis: Tungsten(W), Copper(Cu), Tin(Sn), and Iron(Fe).
Image Credit: Horiba Scientific
[EMIA-Pro Carbon/Sulfur Analyzer]相关推荐
Mounting Autosampler AUTOsample-100 Compatible with 100 MHz Benchtop NMR Spectrometer
Nanalysis’stop mounting autosampler is compatible with the 100 MHz benchtop NMR spectromete……...
National Institute of Standards and Technology (NIST)
The National Institute of Standards and Technology (NIST) was founded in 1901 and is now part of ……...
Swain Tech Coatings, Inc.
Swain Tech Coatings provides high performance engine coatings and industrial coatings to solve th……...
Dynamic Fat Crystallization Analysis Using TD-NMR
Understanding the crystallization of fats like cocoa butter (a constituent used in chocolate and ……...
3D Hubs
3D Hubs is the world’s largest network of manufacturing services. With production facilitie……...
今日仪器
-
Lightwave Logic, Inc.
Lightwave Logic develops innovative optical materials and devices for the Algorithmic Age. We seek to lower the friction for moving the ever-growing amounts of data that characterize our times. Our……
-
Engineered Lifting Systems, LLC
Engineered Lifting Systems is a distributor in the industrial lifting market, providing professional design, sales and service to customers looking for knowledgeable and expert applications assista……
-
IMADA, Incorporated
Imada, Inc. provides durable, accurate and precise strength, hardness, torque and force measurement instruments and related force measurement type equipment to a variety of industries — aeros……
