Analyze Gas Components from Combustion Processes with FT-IR - MBGAS-3000

ABB offers the MBGAS-3000 FT-IR Gas Analyzer for multi-gas component analysis in combustion processes.

This complete real-time measurement analyzer can be conveniently incorporated into a continuous emission monitoring solution.

Excellent sensitivity, stability and photometric accuracy are the key advantages of this Fourier-transform infrared (FTIR) technology-based analyzer.

The analyzer does not require any sample treatment except dust filtering as it is based on wet/hot sample extraction. Sample integrity can be maintained without the need for diluting the sample. It is possible to integrate analyzer with the current dry sample systems.

Key Features and Advantages

The following are the key features and advantages of the MBGAS-3000 FT-IR Gas Analyzer:

High-end analytical performance in compliance with emission monitoring regulations

Pre-defined analysis for monitoring combustion processes with special focus on waste incineration, process, and power emissions

Minimum commissioning time

Design target for single-point calibration per gas range, including water

Flexible with the multi-range support capabilities

Low maintenance costs thanks to the long-lasting IR source, field serviceable modules, and maintenance-free interferometer.

Fast response time owing to the long and short path cell low-volume design

Highly reliable analyzer with advanced embedded software implementation

Modular design for in-field serviceability

Robust software design ensures very high reliability

Simplified integration: Wall or 19” rack mount and it may be required to adjust the rack mount

Minimal commissioning and maintenance

Pre-defined multi-component analysis for monitoring emissions

Unit reports calibrated engineering data with embedded processing

Designed to meet performance requirements in conformation with standard EN15267-3:2008-3

Key Specifications

The MBGAS-3000 FT-IR Gas Analyzer is an integrated analyzer featuring three modules on single mounting plate/bracket: electronic , interferometer, and gas cell. The key specifications of the analyzer are as follows:

Dimensions: 46cm (W) x 70cm (H) x 27cm (D)

19½ “ standard rack or wall mount

Swagelok™ connector fittings to fit 1/4-inch tubing for inlet and outlet of cell

Weight is 35kg

Path length fixed at 3.24-meters (multi-pass)

Sample cell: 1-liter volume, heatable (up to 200C), resistant mirrors, aluminum body

DTGS detector

Spectral range is 800-000 cm^-1

ZnSe & BaF2 Optical components

Power requirements: 90 – 250VAC (± 15V) & 50 – 60Hz (± 3Hz)

Power consumption: 1200W @ start-up, 190W @ normal operation

Communications : TCP/IP protocol to I/O controller

Pre-defined combustion analysis : NH₃, SO₂, NO, NO₂, N₂O, CO, HCl, HF, CH₄, H₂O, CO₂

Embedded processor with FTE software

Integration Requirements

Temperature controller for sample cell

All utilities for operation including reference and purge gases

Heated gas transport in and out of cell

Additional calibration techniques are available at additional charge