The Safety Standard in Flash Point Testing for Liquids and Samples
MINIFLASH is an exclusively engineered flash point series of instruments for the automatic determ……...
The QIC biosteam is designed for the continuous analysis of gases and vapours from multiple fermentation reactors and has multi off gas and multi reactor dissolved gas species analysis capability.
The system features Hiden’s advanced 'Proteus'Multi-stream selector valve along with an accurate, ultra-stable triple filter mass analyzer. Low internal dead volume and quick data acquisition enable switching times of less than 10 seconds for each stream.
Features
The system features 20-, 40-and 80-way sample configurationsand an integral thermocouple or heater of up to 120 °C
Gas flows from 0.01 to 10 L per minute at pressures ranging from 10 mbar to 2 bar, with 100 amu profile in 2.5 seconds
Strong, flexibleand heated QIC direct inlet has less than 500 ms response to vapors or gases
High sensitivity (to 5 ppb) and stability (< ±0.5% height variation, 24 hours), up to 510 amu
Zero 'crosstalk'for low memory effects and low dead volume for a quick response
Direct-drive, high-torque microstepping motor comes with an incremental rotary encoder for closed-loop motion and home z-position
The latest face-sealing technology offers an effective and durable seal (>6 × 106 events)
Windows ™—MASsoft control through Ethernet LAN, RS485, or RS232
Soft ionization for analyzing complex organics
Motion management, such as bi-directional travel for shortest path, error annunciation, position maintenance, and intelligent acceleration or deceleration
Key Features
Hiden 3F ultra-stable mass spectrometer
Rapid port switching
Quantitative gas analysis of up to 32 species
High flow configuration of up to 10 L/minute
Proteus 20, 40, or 80-way multi-port switching options are available
Low flow configuration from 4 mL/minute
OPC Server technology for process control
Dissolved species analysis
Respiratory Quotient (RQ)
CO2 Evolution Rate (CER)
Oxygen Uptake Rate (OUR)
Applications
Biogas production monitoring
Fermentation process analysis
Synthetic process analysis
Mammalian cell culture analysis
Reaction profile studies
Spatially resolved MS
High-purity gas analysis
Fuel cells
Fermentation
Environmental monitoring
Gas production and storage
Technical Specifications of QIC BioStream
Source: Hiden Analytical
. | |
---|---|
Mass Range | |
200 or 300 amu |
|
Operating Modes | |
Process trend analysis Bar Scan Profile Scan |
|
Mass Spectrometer | |
Precision Triple Filter Quadrupole - 200 amu is standard |
|
Inlet | |
20, 40 or 80-way multiplexed inlet multiple stream sampling |
|
Data Acquisition & Control | |
Windows 7/8/10 compatible with Ethernet, USB and serial connections |
|
Dimensions | |
QIC BioStream System 1050 mm x 550 mm x 1260 mm QIC BioStream-C bench-top 530 mm x 535 mm x 936 mm |
Fermenter Sampling
Shown below is a standard system setup for sampling from numerous fermenters, configured with sample lines, sample conditioning components, and flow control valves to house reactors with flows ranging from 100 mL/minute up to >10 L/minute.
Image Credit: Hiden Analytical
MINIFLASH is an exclusively engineered flash point series of instruments for the automatic determ……...
All analytical instrumentation is usually located centrally in a Quality Control lab. This is alw……...
The new TM4000 II benchtop SEM from Hitachi enables users to image and analyze any sample easily ……...
Harvey Vogel Manufacturing routinely produces metal stampings. Our metal stamping engineering exp……...
Gill Sensors have employed patented induction technology and the novel use of capacitive theory t……...
Surf-Tech Manufacturing Corporation has been providing contract manufacturing services to all ty……...
Established in 1991, the Institute of Microelectronics (IME) is a research institute under Singapore’s Agency for Science, Technology and Research (A*STAR). In IME, we focus on delivering hig……
Micropol is based in Stalybridge, Cheshire and has over 30 years experience in polymers. Out technical expertise is world class and out customers world wide. Our extensive in-house facilities allow……
RAS Process Equipment , was established in 1977 and is committed to the design, engineering and manufacturing of quality process equipment for our customers. Equipment can be manufactured to the AS……