5-Point Traceable Calibration High Stable Wet/Dry Differential Pressure Transducers

Pressure cycles: 1 million minimum

Operating temperature:

Response time: <1 ms

Thermal accuracy:% Span shift over compensated temperature range

Bandwidth: DC to 1 kHz typical

Media compatibility:

Shock: 50 g, 11 ms, half-sine, vertical and horizontal axis

Pressure ports: ¼NPT male

CE complient: Meets EN61326-1: 2006 for industrial locations

Vibration: 5-2000-5 Hz 30 minute cycle, curve L Mil-Spec 810 figure 514-2-2, horizontal and vertical axis

Proof pressure (differential):

Line/static pressure: 500 psi max applied to both sides simultaneously

Hi side containment pressure (differential):

Weight: 200 g (7 oz) max

Electrical terminations:

Uni-Directional mV/V Specifications

The uni-directional mV/V specifications of the wet/dry transducers are as follows:

Current draw: 5 mA @ 10 Vdc

Output: 10 mV/V ratiometric

Span setting:

Supply voltage: 5 to 10 Vdc

Zero balance:

Input impedance: 1000 to 5000 Ω

Output impedance: 5000 Ω ±10% typical

Uni-Directional Voltage Output Specifications

The uni-directional voltage output specifications of the wet/dry transducers are as follows:

Current draw: 10 mA max

Output impedance: 100 Ω

Output voltage/supply voltage: 0 to 5 Vdc/ 10 to 30 Vdc; 0 to 10 Vdc/15 to 30 Vdc (change "5V" to "10V" in model number)

Zero balance:

Maximum current output: 2 mA (= 2500 Ω min load resistance)

Span setting:

Uni-Directional mA Specifications

The uni-directional mA specifications of the wet/dry transducers are as follows:

Supply voltage: 9 to 30 Vdc; [9 to 20 Vdc above 105 °C (229 °F)]

Output: 4 to 20 mA

Zero balance:

Maximum loop resistance: (Vs-9) x 50 Ω

Span setting:

Four Termination Styles

The following are the four termination styles available with wet/dry transducers:

PX409 = 2 m (6ft) cable

PX419 = mini-DIN connector

PX429 = Twist-lock connector

PX459 = M12 connector